Is it possible to configure an auto forward? 1

[C3rv32a2]

For example, I have extension number 3030, at 3:30 pm this extension is forward to a mobile phone number, so what they need to do is that at midnight this extension is forwarded to another mobile number, but since at midnight nobody is to change the forward if this procedure can be done automatically?

Thanks...

 

[Splic3d]

Sounds like an interesting challenge. If you have Call Pilot you might use an application to use the "time of day", "day of week", ect.. Forward 3030 to a phantom pointing to the app.

http://www.i3techgroup.com

If its not working, get a bigger hammer!

Avaya/Nortel/NEC/Asterisk/Access Control/CCTV/DSX/Acti/UCx

 

[Splic3d]

I should have also said to point those timers to transfer blocks with the cell numbers of your choice in the app.

http://www.i3techgroup.com

If its not working, get a bigger hammer!

Avaya/Nortel/NEC/Asterisk/Access Control/CCTV/DSX/Acti/UCx

 

[C3rv32a2]

Sorry but no call pilot in use...

 

[30n30w]

You could use something like this:

http://www.tek-tips.com/viewthread.cfm?qid=1711468

but you'll need some MS Exchange, Outlook, and VBA knowledge...

30n30w

 

[GHTROUT]

Create a RCO that is one ring, then use Call Redirection Time of Day. On regular times, the number will FDN to the place 3030 rings. On off times, the call will FDN to the mobile. The FDN time will be one ring.

Here is RCO

http://www.ghtrout.com/rdr/rco.html

Gere is RDR by Time of Day

http://www.ghtrout.com/rdr/rtda.html

~~
Gene at www.GHTROUT.com