IRQ Assignments 1

[TheAceMan1]

Howdy All

How can I get a list of IRQ assignments without parsing thru Device Manager?

[blue]Your Thoughts? . . .[/blue]

See Ya! . . . . . .

Be sure to see faq219-2884 [blue]Worthy Reading![/blue]
Also faq181-2886 [blue]Worthy Reading![/blue]

 

[rclarke250]

My thought would be to check system information. Go to all programs,accessories,system tools, and system information. Choose hardware, and then IRQ, it will list them all out for you.

 

[TheAceMan1]

How are ya rclarke250 . . .

Many thanks. I knew it was under my fingertips somewhere ... just never logged it!

My next question will be a doosey ...

See Ya! . . . . . .

Be sure to see faq219-2884 [blue]Worthy Reading![/blue]
Also faq181-2886 [blue]Worthy Reading![/blue]

 

[strongm]

Well I guess ... Here's a VBscript WMI solution I've just knocked together:

[blue]    Dim objLocator, objService, colMemory, Memory, colPNP, PNP,  colIRQ, IRQ
    Set objLocator = CreateObject("WbemScripting.SWbemLocator")
    Set objService = objLocator.ConnectServer(".", "root\cimv2")

    Set colMemory = objService.ExecQuery("Select * from Win32_DeviceMemoryAddress")
    For Each Memory In colMemory
        Set colPNP = objService.ExecQuery("ASSOCIATORS OF {Win32_DeviceMemoryAddress.StartingAddress='" + Memory.StartingAddress + "'} WHERE RESULTCLASS  = Win32_PnPEntity")
        For Each pnp In colPNP
            Set colIRQ = objService.ExecQuery("ASSOCIATORS OF {Win32_PnPEntity.DeviceID='" + pnp.PNPDeviceID + "'} WHERE RESULTCLASS  = Win32_IRQResource")
            For Each IRQ In colIRQ
                result = "IRQ " & IRQ.irqNumber & Chr(9) & pnp.Caption
            Next
            If result <> "" Then wscript.echo  result
            result = ""
        Next
    Next[/blue]

 

[TheAceMan1]

How are ya strongm . . .

So sorry. [blue]I didn't intend to send you thru all that code.[/blue] MSInfo32 was quite sufficient. In fact DeviceManager-View-Resources by type-Interrupt request (IRQ) use to be a good spot for me. Just hav'nt had the need in awhile.

I tried the code anyway and there were problems identifying [blue]result[/blue] & [blue]wscript[/blue].



See Ya! . . . . . .

Be sure to see faq219-2884 [blue]Worthy Reading![/blue]
Also faq181-2886 [blue]Worthy Reading![/blue]

 

[strongm]

Ah, I'm guessing you tried running it in a VBA environment, then. But it's a VBscript solution ...