IPSI card routing table

[JanosTarjanyi]

Hi,

I have met a itresting problem. In the IPSI card i found some unnecessary line (highlighted with red) in the ROUTE HOST TABLE. The IPSI card got it from somewhere, but i have no idea from where. Unfortunately those unnecessary lines cause problem when the gateway goes to ESS mode.
If anybody have idea how can I fix it, it will be appreciated.

Here is the routing table :

[IPADMIN]: show route

ROUTE NET TABLE
destination gateway flags Refcnt Use Interface
----------------------------------------------------------------------------
0.0.0.0 172.20.136.1 3 0 27 motfcc1
172.20.136.0 172.20.136.10 101 0 0 motfcc1
192.11.13.0 192.11.13.6 101 0 0 motfcc2
192.168.13.0 192.168.13.65 101 0 0 pkt3
----------------------------------------------------------------------------

ROUTE HOST TABLE
destination gateway flags Refcnt Use Interface
----------------------------------------------------------------------------
127.0.0.1 127.0.0.1 5 2 3853 lo0
172.18.136.1 172.20.136.254 17 0 15 motfcc1
172.18.136.11 172.20.136.254 17 2 285285 motfcc1
172.18.136.12 172.20.136.254 17 1 87374 motfcc1
----------------------------------------------------------------------------