Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Wanet Telecoms Ltd on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IPSI and PN removal

Status
Not open for further replies.

Tachito2750

Technical User
Feb 5, 2015
6
US
Can anyone assist with the steps for decommissioning two IPSI carda and one PN?
 
I can assist, are you removing the entire port network? What model of cabinet and CM revision are you running?
 
Yes - removing an entire port network that consists of two IPSI boards. CM 3.01
 
First thing, take all the translations out of it.

"list conf port X"
Make sure everything is cleared -- trunks, stations etc.

Then you'll want to remove the IPSIs and the cabinet.

 
Correct! Is removing the IPSI cards as simple as "busying-out" and "removing" the card? Or is there something else that I am missing?
 
Yep. It should be at least.

Once you are finished, doing a "list conf port X" should show nothing.

 
Don't forget, you have to do a REM IP-INTERFACE to take out the interface before removing the boards. Also the REM CABINET will be needed if you are taking out an entire G650 cabinet.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top