IPoffice ata16 Help

[billkennedy32]

I have 10 analog lines ready to go in the 16ata port module.

What do i need to configre so i can use the digalt phones to use the analog lines.

The only docs ; i can find is how to hook up the module to the IP office , but none on how to configure it.

Thanks
Bill

 

[bdelmar]

There is nothing to configure for the expansion units, the main unit will recognize it when it's powered up or rebooted. You will have to configure the extension and the users.

 

[billkennedy32]

You will have to configure the extension and the users.



what needs to be configre under the extensions theres not much there

thanks
again