ipo w/ 2 companies, 1 recpt. 1

[flori1]

new install,ipo v2 replacing bcm 400 4.1. kept about 80 t7316 and m7310 sets in place added soft console and a few 9504.
company A has a main DID and company B has a main DID, on incomming calls the reception has her 9504 ring along with a m7310 and a t7406 cordless ring,she is unable to tell if the incomming is for company A or B on the nortel sets,whats the fix on this one?
Thanks.Bob

 

[Gunnaro]

Don't run a museum, so can't test the phone in question, but this will work:

- 2 Group buttons, one for each. Pushing the button while blinking picks up the call for that HG. (If you need it to ring, make Reception member of both HG)

This might work:

- Put Company name in Tag-field on the ICR for each company,


Kind regards

Gunnar
______________________________________
Mille viae ducunt homines per saecula Romam

 

[Westi]

9504 for a reception is ballsy I'd say, why not a real phone 9508 instead the price difference is minuscule.

But Gunnaro is right with his suggestion this will work (not a museum )

Joe W.

FHandw, ACSS (SME), ACIS (SME)


"This is the end of the world, make sure to buy your T-shirt before it is too late"
Original expression of my daughter

 

[Gunnaro]

Even 9508 without button modules is ballsy, unless there is a SoftConsole in play.

Kind regards

Gunnar
______________________________________
Mille viae ducunt homines per saecula Romam

 

[Westi]

You have way too much time on your hand Gunnar, have a star for making me laugh.

Joe W.

FHandw, ACSS (SME), ACIS (SME)


"This is the end of the world, make sure to buy your T-shirt before it is too late"
Original expression of my daughter

 

[Gunnaro]

Not at all, Westi. I'm just multi-tasking.

Thanks for ze pink!

Kind regards

Gunnar
______________________________________
Mille viae ducunt homines per saecula Romam