Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Wanet Telecoms Ltd on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IPO to CONFR BRIDGE to TELEPHONE HYBRID to MEDIASITE RECORDER

Status
Not open for further replies.

aarenot

Vendor
Aug 30, 2003
2,383
US

This digital unit appears to be able to do auto answer, and handle the translation of an analog extension off the IPO to the Mediasite Recorder input (balanced XLR) to send the analog extensions audio into the recorder.

My intent is to set up an Auto Attendant(AA) for multiple callers to access a conference bridge AA MENU to access a (MEET ME) conference. This menu, or another menu must also have the ability to add the analog extension connected to the Telephone hybrid(on auto answer), connected to the recorder to the same (MEET ME) Conference.

I have some ideas, but wondered who has done this, or something close, and any feedback? Also, feedback on this or other Telephone hybrids whould be greatly appreciated, I have not bought a Telephone hybrid in a few years so the latest units are new to me. The object is to allow multiple callers (a panel) to speak at the same time, or in succession via the IPO conference bridge capabilities via the IPO analog extension to the Mediasite recording device which will be broadcasting live out to the web conference via Mediasite. The panel members may be calling on from multiple time zones, countries, and or continents via the IPO PRI lines.

HIT ME GUYS IF YOU HAVE DONE THIS RECENTLY IT HAS BEEN ABOUT 3 YEARS SINCE MY LAST RADIO STATION HOOK UP.

MEDIASITTE AUDIO INPUT SPECS BELOW

Digital audio
- IEEE1394 DV
- USB
> Analog audio
- 2 x balanced XLR (stereo)
- 2 x unbalanced RCA (stereo)
> Secondary audio
- Line in - unbalanced
1/8” TRS (stereo)
- Mic in - unbalanced
1/8” TS (mono)
- Line out - unbalanced
1/8” TRS (stereo)
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top