Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IPO 500v2 Version 6.0.18

Status
Not open for further replies.

afrogley

IS-IT--Management
Nov 6, 2006
181
GB
Brand new box with v 6.0.18 on it ...

before I start installing this for a simple dozen IP handsets and 5 SIP channels ... are there any glaringly horrible glitches in this version?
 
just take it to rel7 - no cost

ACSS - SME
General Geek

1832163.png
 
Will do ... ta! :)

Oh - can you clear an afternoon in your diary please ... the Admin software has nearly downloaded so I'm about to be let loose on this one! ;)
 
Just make sure you step any Dig exp modules through 3.2.999 manually, the system will take them up ro R7 straight away and so may cause issues in the long run. You need to change file server type to "Manager" step them through 3.2.999 then back up to 7 then change the file server back to memory card :)

ACSS (SME)
APSS (SME)


"I'm just off to Hartlepool to buy some exploding trousers
 
No dig exp modules in this installation - pure IP phones, a VCM32 and an SD card ... oh and power cable ...
 
ok - you need to downgrade the power cable to rel 2.1 then up to 7 for it to work, otherwise it makes the power supply buzz.

ACSS - SME
General Geek

1832163.png
 
Do I need to do that to the Cat5e fly lead too?
 
Mind the vcm channels !!!
They need DT software otherwise you will get fake distorted calls.

BAZINGA!

I'm not insane, my mother had me tested!
 
DT Software - Deep Thought? .... I know the answer ... 42 .. but what was the question?
 
Just so you know ....
I've got the IPO ready to put in place ...

Life got easier once I opened two copies of Manager and copy pasted ARS and User Rights across (with button programming!)

It seems a shame to put such a capable box in for just 12 (ab)users ... but hey - gives me another box to play with ... :)

It probably won't work though ... ;)

The &£(%£"£ Cisco router is going back in too - don't need to VPN now (or rather - don't need to rely on the VPN - VPN will be in place though!)

That probably won't work either! ;)
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top