Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IPldk offnet Transfer

Status
Not open for further replies.

Chamvari

Vendor
Feb 1, 2008
242
ZW
I hav two system Ipldk100 and Ipldk20 , the system are failing to transfer pstn calls to each othe, by the time you release the call , the call will recall back . I am not using router, these two systems are sitting on the same lan over a Switch.


Dial Tone shoul be There
 
Are the PSTN Lines Analogue Lines..
If so then you will need to be looking at the Open Loop / Disconnect Clear Time on the Lines.
PGM 142 Flex Key 13..

 
I am using pstn let me check that program and I will post the results

Dial Tone shoul be There
 
My lineas are anlogue Pstn i ahve changed the Loop disconnect timer to 0 . it was on 10 but still cnat transfer the call its recalling back.

Dial Tone shoul be There
 
Sometimes it takes longer time to fix problems but when we do it becomes easy. My problem was PGM 111 flex 18 Offnet transfer , this must be set to on , by default on some other system it come off.

Thanks everyone for the Help


Dial Tone shoul be There
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top