Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
IPLDK-60 Relay Diagarm
- Thread starter rmattei
- Start date
The relay in ipLDK-60 is an open/close contact. So there there is onluy the ON/OFF switch function.
Your door strike must be power supplied from the mains. If it is 110 VAC or 230 VAC to switch the door strike on and off, I would use an other external relay, so you only send low voltage through the ipLDK-60.
The ipLDK makes the on/off function and the external relay switches the high voltage to the door strike.
///doktor
Your door strike must be power supplied from the mains. If it is 110 VAC or 230 VAC to switch the door strike on and off, I would use an other external relay, so you only send low voltage through the ipLDK-60.
The ipLDK makes the on/off function and the external relay switches the high voltage to the door strike.
///doktor
- Status