Digitalcoms
Vendor
Hie everyone
Can someone give me the steps needed to check for licences installed on IPECS - MG and SBG.
Can someone give me the steps needed to check for licences installed on IPECS - MG and SBG.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
IPECS Licences
- Thread starter Digitalcoms
- Start date
- Status
The page I found this on was a pdf at
///doktor
____________________________________
///doktor
____________________________________
I added some good extra information...
1. Connect to LDK-24 (telnet)
2. Apply 'admin' and 'admin' for login name and password.
3. Type "c e" and enter OR "co e" if the version is 3.0/3.7
4. Type "call" and enter
5. Type "mnt q d" and enter for displaying the serial number.
6. Write the lock key data "mnt q w X (lock_key_number), where X is the type of lock key.
Lock key type 2 = TAPI
Lock key type 5 = Networking
Lock key type 6 = PC Phone (ezPhone)
Lock key type 8 = TAPI 1st Party
///doktor
____________________________________
1. Connect to LDK-24 (telnet)
2. Apply 'admin' and 'admin' for login name and password.
3. Type "c e" and enter OR "co e" if the version is 3.0/3.7
4. Type "call" and enter
5. Type "mnt q d" and enter for displaying the serial number.
6. Write the lock key data "mnt q w X (lock_key_number), where X is the type of lock key.
Lock key type 2 = TAPI
Lock key type 5 = Networking
Lock key type 6 = PC Phone (ezPhone)
Lock key type 8 = TAPI 1st Party
///doktor
____________________________________
OK.
I guess that you just want to check the number of licenses?
1. Make a [TRANS/PGM]+78 to see the licenses in your ipLDK or iPECS. Just post what the display writes.
///doktor
____________________________________
I guess that you just want to check the number of licenses?
1. Make a [TRANS/PGM]+78 to see the licenses in your ipLDK or iPECS. Just post what the display writes.
///doktor
____________________________________
- Thread starter
- #5
Digitalcoms
Vendor
Many thanks guys. I got all the licences and installed them. Working perfectly!
- Status
Similar threads
- Locked
- Question