ipecs 100 sip configuration

[kayimguney]

hello,

i have read some threads about this topic but they can't managed solve my problem. some of the steps didn't worked for me.

1 - thread1613-1548786
2 - thread1613-1545008

i have followed these threads.

in the first one step 3 didn't worked for me.

1. Select Station User Login (PGM 443) in Device Login section.
2. Enter the desired unused station number as the ID using the format "SIP Phone ID=sip:XXXX", where XXXX is the station number. For Example, the SIP ID=sip:1234 is station number 1234.
3. Click the Save button.

when i click save it cleans the area that i wrote.. but if only i wrote sip:1234 it clears.. if i wrote sip.1234, sip1234 or 1234 it saves..

in the second thread again it doesnt save anyting in pgm133..

any suggestions?

thank you

Guney Kayim

 

[kayimguney]

i have configured my sipphone to work in my network but i want to make it work from another network what should be my proxy or other configurations? and is there anything to do in ipecs to access from another network?

thank you

Guney Kayim

 

[abl2910]

Hello
sip ext need licens


abl2910