mjwilson12379
IS-IT--Management
- Oct 5, 2003
- 113
Hello,
We have 42 sites linked over MPLS. No problems with IP trunks between the sites (ability to dial 2 digit location code + extension) except for a new hub we put in w/ a full PRI to cover a new geographic region.
Line is setup at main site (172.19.38.5):
Line number: 87
Outgoing group: 807
Channels: 16 for all relevant entries
IP: 172.18.10.204
Setup the VoIP tab correctly w/ same entries as other side
Short code 87N, dials N, Line group id is 807
No other short codes/extensions w/ 8 in the beginning
Short code 88N for another site with group 808 is fine
From ANOTHER site, can dial 87N and it works ok to here, not from this one though.
Line is setup at the remote site (172.18.10.204):
Line number: 30
Outgoing group: 300
Channels: 16 set for all relevant entries
IP: 172.19.38.5
Short code 30N, dials N, line group id is 300
No other short codes/extensions w/ 3 in the beginning
When I dial 87401 from my desk phone, in the monitor, I see:
5828870mS CMTARGET: LOOKUP CALL ROUTE:63 type=100 called_party=87 sub= calling=25072 in=0 complete=0
5828871mS CMTARGET: ADD TARGET:63 number=87 type=100 depth=1 nobar=1 setorig=1
5828871mS CMTARGET: SYS SC:63 87 3 sc=type=Dial code=87N, num=N
5828871mS CMTARGET: LCR NOT MATCHED:63 (cpn=)
5828871mS CMTARGET: DIAL LINE:63 GROUP=807 SUCCESS=1
5828872mS CMTARGET: OVERLAP LOOKUP CALL ROUTE:63 returned 1
5828874mS CMLineTx: v=87
CMSetup
Line: type=IPLine 87 Call: lid=0 id=1098 in=0
Calling[25072] Type=Internal (101)
BC: CMTC=Speech CMTM=Circuit CMTR=64 CMST=Default CMU1=ULaw
BChan: slot=250 chan=9069
Product Unknown
IE CMIETxChannelAudio (1) comptype=G729SIMP (7) pktsize=20 ipaddr=172.18.10.204 port=0
IE CMIERxChannelAudio (2) comptype=G729SIMP (7) pktsize=20 ipaddr=172.19.38.5 port=49328
Display [Michael Wilson]
Cause=16, Normal call clearing
Locale: enu
5833874mS CMTARGET: LCR TIMEOUT:63
5833876mS CMTARGET: LCR NOT MATCHED:63 (cpn=401)
5833876mS CMTARGET: ADD TARGET:63 number=87401 type=100 depth=1 nobar=1 setorig=0
5833876mS CMTARGET: SYS SC:63 87401 3 401 sc=type=Dial code=87N, num=N
5833877mS CMTARGET: LCR NOT MATCHED:63 (cpn=401)
5833877mS CMTARGET: DIAL LINE:63 GROUP=807 SUCCESS=0
5833877mS CMTARGET: SELECT:63 1 0 TGHG=00000000 TGUSER=00000000 INCL=00000000 EXCL=00000000
5833877mS CMTARGET: SELECT:63 NO TARGETS, TRY VOICEMAIL
I have some great feeling that I have done this so many times that i am overlooking a very simple problem or did something incorrect... however, I have been looking at this for a day now. Maybe a fresh pair of eyes might help?
Thanks,
Michael
We have 42 sites linked over MPLS. No problems with IP trunks between the sites (ability to dial 2 digit location code + extension) except for a new hub we put in w/ a full PRI to cover a new geographic region.
Line is setup at main site (172.19.38.5):
Line number: 87
Outgoing group: 807
Channels: 16 for all relevant entries
IP: 172.18.10.204
Setup the VoIP tab correctly w/ same entries as other side
Short code 87N, dials N, Line group id is 807
No other short codes/extensions w/ 8 in the beginning
Short code 88N for another site with group 808 is fine
From ANOTHER site, can dial 87N and it works ok to here, not from this one though.
Line is setup at the remote site (172.18.10.204):
Line number: 30
Outgoing group: 300
Channels: 16 set for all relevant entries
IP: 172.19.38.5
Short code 30N, dials N, line group id is 300
No other short codes/extensions w/ 3 in the beginning
When I dial 87401 from my desk phone, in the monitor, I see:
5828870mS CMTARGET: LOOKUP CALL ROUTE:63 type=100 called_party=87 sub= calling=25072 in=0 complete=0
5828871mS CMTARGET: ADD TARGET:63 number=87 type=100 depth=1 nobar=1 setorig=1
5828871mS CMTARGET: SYS SC:63 87 3 sc=type=Dial code=87N, num=N
5828871mS CMTARGET: LCR NOT MATCHED:63 (cpn=)
5828871mS CMTARGET: DIAL LINE:63 GROUP=807 SUCCESS=1
5828872mS CMTARGET: OVERLAP LOOKUP CALL ROUTE:63 returned 1
5828874mS CMLineTx: v=87
CMSetup
Line: type=IPLine 87 Call: lid=0 id=1098 in=0
Calling[25072] Type=Internal (101)
BC: CMTC=Speech CMTM=Circuit CMTR=64 CMST=Default CMU1=ULaw
BChan: slot=250 chan=9069
Product Unknown
IE CMIETxChannelAudio (1) comptype=G729SIMP (7) pktsize=20 ipaddr=172.18.10.204 port=0
IE CMIERxChannelAudio (2) comptype=G729SIMP (7) pktsize=20 ipaddr=172.19.38.5 port=49328
Display [Michael Wilson]
Cause=16, Normal call clearing
Locale: enu
5833874mS CMTARGET: LCR TIMEOUT:63
5833876mS CMTARGET: LCR NOT MATCHED:63 (cpn=401)
5833876mS CMTARGET: ADD TARGET:63 number=87401 type=100 depth=1 nobar=1 setorig=0
5833876mS CMTARGET: SYS SC:63 87401 3 401 sc=type=Dial code=87N, num=N
5833877mS CMTARGET: LCR NOT MATCHED:63 (cpn=401)
5833877mS CMTARGET: DIAL LINE:63 GROUP=807 SUCCESS=0
5833877mS CMTARGET: SELECT:63 1 0 TGHG=00000000 TGUSER=00000000 INCL=00000000 EXCL=00000000
5833877mS CMTARGET: SELECT:63 NO TARGETS, TRY VOICEMAIL
I have some great feeling that I have done this so many times that i am overlooking a very simple problem or did something incorrect... however, I have been looking at this for a day now. Maybe a fresh pair of eyes might help?
Thanks,
Michael