IP routes 1

[sidetracked]

I have to interfaces. 1 is my nat inside and 1 is my nat outside. I have a crypto vpn set to another location. in my routes i added 0.0.0.0 0.0.0.0 192.168.0.1 . Which is telling the clients to forward all request to another gateway on the subnet. I am trying to add 192.58.8.0 0.0.0.255 public ip address but it keeps saying inconsistent ip address and mask? whats the problem

MCSE 2K - MCSA 2K - NET+ - A+

Paul..

 

[rburke]

Is there any reason that you are using the wildcard bit mask instead of a subnet mask when describing the block?

"192.58.8.0 0.0.0.255" should be 192.58.8.0 255.255.255.0

If you are getting this error when trying ot assign an address to an interface then that is going to be the problem. Can you give more information as you when you get this error?

Burke

 

[sidetracked]

OMG..that went right past me..i was trying to figure it out for 2 hours...

MCSE 2K - MCSA 2K - NET+ - A+

Paul..

 

[rburke]

So you got it working?

 

[sidetracked]

Yes i did..thanks

MCSE 2K - MCSA 2K - NET+ - A+

Paul..