Config: S8500 - CM 3.0 / Facilities in question supported by an S8300 LSP
We have a small business group (probably 8 - 10 phones) that will temporarily be moving operations to a room not directly connected to our facilities (no hard wiring avaialable). Currently they are using Hard wired 640X sets.
For the short time that they are moving, they will be using a wireless bridge for data connectivity to our LAN - approx 100 - 200 feet from the data room.
The group is wondering if it's possible to use the same type of setup to connect IP phones (I.E. Wireless bridge). Since we currently have NO IP phones connected anywhere in the office, I decided this is the best place to seek suggestions.
We have a small business group (probably 8 - 10 phones) that will temporarily be moving operations to a room not directly connected to our facilities (no hard wiring avaialable). Currently they are using Hard wired 640X sets.
For the short time that they are moving, they will be using a wireless bridge for data connectivity to our LAN - approx 100 - 200 feet from the data room.
The group is wondering if it's possible to use the same type of setup to connect IP phones (I.E. Wireless bridge). Since we currently have NO IP phones connected anywhere in the office, I decided this is the best place to seek suggestions.