IP Phone's Call Server address on a S8500/G450

[shanghairomeo]

Hi,all

I wonder know the Call server address on IP Phone when the PBX is S8500/G450, because no c-lan, I can't write the c-lan address. I think the G450's MGC is S8500, right? If the S8500's IP address is the call server address on IP phone? Who can help me? Thanks

 

[big70]

yep, you must register the g450 and the ip-phones to the s8500

Processor Ethernet (PE)
Prior to Communication Manager 3.1, an S8500 Media Server required a CLAN board in a port network to provide IP connectivity to, H.323 endpoints, H.248 gateways, adjuncts, and IP trunks. With PE in Communication Manager 3.1:
All IP connected devices that required a CLAN can now connect to the main server using the PE interface.
A simplex Enterprise Survivable Server (ESS) or Local Survivable Server (LSP) can support alternate adjunct link connectivity to CMS, CDR and AESVCS.
The S8500 Media Server can be used as a main server in a pure IP configuration and/or as an LSP.
The larger configurations where traffic exceeds the capacity of the PE interface or in a configuration where a CLAN is already present, the PE interface can be used in conjunction with one or more CLANs.
Processor Ethernet is available on simplex servers like the S8500, S8400 and S8300. PE is also available on a S8500 LSP, S8500 ESS and S8300 LSP. However, PE is not available for the duplicated S87XX series servers.

Processor Ethernet eliminates the need for a G650 gateway, IPSI and CLAN when connecting H.248 Gateways (G700, G350 and G250) to a S8500 or S8400 Media Server. Results in reduced footprint and lower cost solution.


Greets Peter

 

[shanghairomeo]

Thanks, It's too useful.