IP phone & Tone

[machtus]

Hi all, i haven't same tone in IP phone. pls help where is problem

 

[SYAR2003]

The ip phones has it's firmware and they have
a buildt in tone generator .
The dialtone , ringback tone e.g you her from theese
don't come from the md's TSU/TMU board but
is generated in the phone itself .
Thats why they sound different .

Make sure that the latest firmware is loaded in the phones and that the firmware is for your market .

 

[machtus]

i have last firmware,haven't it?

<iperp:dir=all;
IP EXTENSION REVISION DATA
DIR REVISION IP TERMINAL
100 R1D/R1F/R1B DBC42501
101 R1D/R1F/R1B DBC42501


If you have newest firmware pls send me to my mail machtus@chello.cz Thanks

 

[SYAR2003]

Hi machtus !
It dont look like you have latest sw i'm afraid.

This phone firmware also need new fw on ELU32 .
VOIPF CAA 158 0022 R1A R2B/1 new R2D
And this ELU32 fw need a patch in MD110 to get the board active, don't remember its's FR right now .

Released together with BC12 Sp2.
D4 ip-phone sw

D4 IP Boot FW CAA 158 0017
old R1B
old R1D
new R2A

D4 IP Appl CAA 158 0018
old R1F
old R1G
new R2B

D4 IP config CAA 158 0019
old R1F
old R1G
new R2C

D4 IP lang CAA 158 0020
old R1B
old R1C
new R2A

SYAR

 

[lalrl]

What is with dialtone if I have engaged a public line. Is this tone then from PSTN or also from IP-Phone?

 

[SYAR2003]

If you use overlap and dials accesscode it's heard from pstn .
When you pick up the handset (internal dialtone) its
from the phone .

 

[lalrl]

If you dial the accesscode then tone comes from phone. I`m quitely sure, because I did test it today and I use Overlapping. Internal dialtone and external dialtone were the same (stuttered) - but different from the tone I hear with digital phone (continuous tone for external line). Maybe I have an other problem...

 

[FiveSwords]

Various tones for EBC IP-phones are defined in the config-files. This is also covered in Alex (the part about the cofniguration files for IP-phones).