Mar 13, 2007 #1 Zwinter IS-IT--Management Joined Mar 9, 2006 Messages 22 Location CA After the DST change all my IP 2002 sets are showing the wrong time (1 hour behind). All other sets M2616, IP2004, and IP2007 are fine.
After the DST change all my IP 2002 sets are showing the wrong time (1 hour behind). All other sets M2616, IP2004, and IP2007 are fine.
Mar 13, 2007 #2 bigindian65 Technical User Joined Dec 27, 2006 Messages 4,597 Location US what's your option/system? Upvote 0 Downvote
Mar 13, 2007 Thread starter #3 Zwinter IS-IT--Management Joined Mar 9, 2006 Messages 22 Location CA CS1000M 4.5 Upvote 0 Downvote
Mar 13, 2007 #4 Trevatwork IS-IT--Management Joined Nov 30, 2006 Messages 309 have you tried re-setting the phones mute up down up down up mute 9 Release Phone will then reset. Trevor Upvote 0 Downvote
have you tried re-setting the phones mute up down up down up mute 9 Release Phone will then reset. Trevor
Mar 13, 2007 Thread starter #5 Zwinter IS-IT--Management Joined Mar 9, 2006 Messages 22 Location CA I tried both ways of resetting the set with no luck. Upvote 0 Downvote
Mar 14, 2007 #6 marcuspb IS-IT--Management Joined Jan 12, 2004 Messages 223 Location US I think there is an additional patch for this, our 2050's are acting up too Upvote 0 Downvote
Mar 14, 2007 Thread starter #7 Zwinter IS-IT--Management Joined Mar 9, 2006 Messages 22 Location CA Does anyone know what the patch is? Upvote 0 Downvote
Mar 15, 2007 #8 Bandit454 Technical User Joined Feb 1, 2006 Messages 26 Location US Ours is doing the same thing, anybody find out anything? Upvote 0 Downvote
Mar 16, 2007 #9 sporty2 Technical User Joined Feb 16, 2006 Messages 159 Location US A quick fix is to change the system time by 1 min. and the I2002 will correct the time display. sporty2 Upvote 0 Downvote
A quick fix is to change the system time by 1 min. and the I2002 will correct the time display. sporty2
Mar 16, 2007 Thread starter #10 Zwinter IS-IT--Management Joined Mar 9, 2006 Messages 22 Location CA Quick did not work. I am assuming you are talking about the PBX time. LD 2 stad 16 03 2007 11 18 04 Upvote 0 Downvote
Mar 16, 2007 Thread starter #11 Zwinter IS-IT--Management Joined Mar 9, 2006 Messages 22 Location CA Typo sorry....quick fix did not work. Upvote 0 Downvote
Mar 21, 2007 Thread starter #12 Zwinter IS-IT--Management Joined Mar 9, 2006 Messages 22 Location CA Anyone find out if this is a firmware upgrade or a PEP? Upvote 0 Downvote
Mar 21, 2007 #13 gwebster Vendor Joined Jul 1, 2006 Messages 2,512 Location CA MPLR21738 on Sig Server & MPLR22123 for Call Server Upvote 0 Downvote