On an IP Office V2 7.0 we are using an analog station port to page with a UPAM. Paging is working but when the person making the page hangs up the IPO continues to send a low volume high pitched tone for about 5 seconds that is heard over the paging sytem. The paging company has tried 4 different page modules from Viking, Bogen, Valcom etc. Anybody out there here of this problem?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
IP office V2 7.0
- Thread starter bill4comm
- Start date
Telecomboy
Programmer
The extension port is probably set to standard telephone. Change it to paging speaker.
amriddle01
Programmer
Wrong, needs to be IVR port, see below from Manager:
· IP Office 4.0+: When using a UPAM connected to an analog extension port, the extension's Equipment Classification (Extension | Analog) should be set to IVR Port and not Paging Speaker.
· IP Office 4.0+: When using a UPAM connected to an analog extension port, the extension's Equipment Classification (Extension | Analog) should be set to IVR Port and not Paging Speaker.
- Thread starter
- #5
amriddle01
Programmer
- Thread starter
- #7
- Status
Similar threads
- Locked
- Question