I just got a Cisco Concentrator 3005 and i am trying to get it configured. I supplied it with the private IP address so i can connect to it through ip instead of COM, but as soon as i change it, I get this messsage over and over again and i can not ping the appliance.
Ethernet Interface 1 -> [ 3 ]
426 10/23/2003 08:29:27.830 SEV=3 IP/2 RPT=202
IP Interface 1 status changed to Link Down.
427 10/23/2003 08:29:28.830 SEV=3 IP/1 RPT=203
IP Interface 1 status changed to Link Up.
What am i doing wrong?
Ethernet Interface 1 -> [ 3 ]
426 10/23/2003 08:29:27.830 SEV=3 IP/2 RPT=202
IP Interface 1 status changed to Link Down.
427 10/23/2003 08:29:28.830 SEV=3 IP/1 RPT=203
IP Interface 1 status changed to Link Up.
What am i doing wrong?