IP DECT R4 & Resilience SCN 1

[VanZenden]

Hi all,

I know what I'm going to ask is (probably) not officialy supported.

Can IP Dect R4 base station(s) register to secondary IP Office in case primary fails - Resilicance SCN?

I've seen in documentation for DECT R4 that you can add secondary gatekeeper, so probably should work, but at this time don't have any IP DectR4 station to test it...

In IPO Manager Help documentantion supported IP phones for (Resilience SCN) backup are 16xx, 46xx & 56xx.

Has anyone tried that?

Thanks in advance...

 

[amriddle01]

I doubt it would work to be honest, the programming is not in place for the trunk in the second IP office to only register upon failure of the primary IP Office, it is specifically part of R5 programming to register another systems handsets when the LAN1 or power fails but not IP DECT trunks

ACS - IP Office Implement

"What the Crocodile Hat....was that?

 

[tlpeter]

You can not set a second ip address
This is only possible with the Aastra version




ACS - Implement IP Office
ACA - Implement IP Telephony -- ACA - Design IP Telephony
ACA - Voice Services Management
______________
Women and cats can do as they please and men and dogs should relax and get used to the idea!

 

[VanZenden]

Thanks for reply ... it seems I'll have to offer CM with LSP

 

[tlpeter]

Oke i tested it
Yes you can make a second trunk and yes the phones will make there extensions on the second ipo

If you pull the power on the first ipo the phone register on the second ipo but sometimes you need to try a couple of times to get dialtone

So it is not very good but it works (most of the time)

If redundancy is that important you really need to go for a CM
If not then you good give it a try




ACS - Implement IP Office
ACA - Implement IP Telephony -- ACA - Design IP Telephony
ACA - Voice Services Management
______________
Women and cats can do as they please and men and dogs should relax and get used to the idea!