IOS question 1

[guardgirl]

I just got some new routers that have 12.2 (8r) as the version. I need to change it to 12.1 (c2600-ik2s-mz.121-15.bin) since it has been tested and approved for my network. This will also install crypto on my routers (2621XM). I TFTP them and do a reload yet the version never changes. What am I missing????

 

[lgarner]

Are you keeping both versions, and is there a "boot system" line in your config?

 

[NettableWalker]

use copy tftp flash and erase the flash before the new upload. then reload and show version and that should do it.

 

[abdeltef]

Hi,
you need !!!!
- THE soft TFTP installed (PumKIN.exe)
- IOS.


For implement the ios :

- using cable Cisco (9pts/RJ45).
- hyper terminal ( 9600 8-N-1)

firstly configuration IP :
- exemple: 10.0.0.2 255.255.255.0 for your laptop.
- and take for the cisco interface int fast 0/0:

Fastethernet: 10.0.0.1 255.255.255.0
Router>enable
Router#
Router# config t
Router(config)# interface fastethernet 0/0 ----? ou 0/0:0 ou 0
Router(config-if)# ip address 10.0.0.1 255.255.255.0
Router(config-if)# no shutdown
Router(config-if)#exit
Router(config)#exit
Router# wr mem
Destination filename [startup-config]? enter
normally with a crossed cable you can ping the PC from the cisco!!!!

set pumkin.exe
in option : tftp filesystem root(download the path) where the ios is save in your laptop. gives all file and take all files.



Router#copy tftp flash
Address or name of remote host []? 10.0.0.2 ?(ip address of the laptop)
Source filename []? c1700-y7-mz.122-15.T7.bin ? (name of the IOS )
Destination filename [c1700-y7-mz.122-15.T7.bin]? ? (Tapez entrer)
Accessing tftp://10.0.0.2/c1700-y7-mz.122-15.T7.bin...
Erase flash: before copying? [confirm] ? enter
Erasing the flash filesystem will remove all files! Continue? [confirm] ? (Tape enter )
Erasing device... eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee ...erasedee
Erase of flash: complete
Loading c1700-y7-mz.122-15.T7.bin from 10.0.0.2 (via FastEthernet0): !!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[OK - 6393852 bytes]

Verifying checksum... OK (0x5D11)
6393852 bytes copied in 78.804 secs (81136 bytes/sec)
Router#
Router#reload
Proceed with reload? [confirm enter)


Router>en
Router#sh version
Cisco Internetwork Operating System Software
IOS (tm) C1700 Software (C1700-Y7-M), Version 12.2(15)T7, RELEASE SOFTWARE (fc2
)
TAC Support:

http://www.cisco.com/tac

Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Sat 09-Aug-03 06:42 by ccai
Image text-base: 0x80008120, data-base: 0x80AB2194

ROM: System Bootstrap, Version 12.2(7r)XM2, RELEASE SOFTWARE (fc1)

Router uptime is 23 minutes
System returned to ROM by reload
System image file is "flash:c1700-y7-mz.122-15.T7.bin"



if you have any question don't hesitate - good work guys.



Abdel-Tef GADDARI

Engineer Network and Transmission.
MSN:abdgad@hotmail.com

 

[guardgirl]

thanks Abdel that's exactly what I am doing. I got stuck working something else yesterday and I am reconfiguring the router now. I will repost if it doesn't work.