I am trying to configure an 827 ADSL router and have put lines in duplicate in the configuration and would like to remove only those lines. How do I do this?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
IOS Configuration Help 2
- Thread starter techshoot
- Start date
-
1
- #2
- Thread starter
- #3
Thanks, now I have a new problem. I did a reset of the system (break durring boot) and now I get the system configuration dialog everytime I boot the router. I still have a startup-config file and if I say no it goes on and boots just fine. How do I get rid of this?
--- System Configuration Dialog ---
Would you like to enter the initial configuration dialog? [yes/no]:
--- System Configuration Dialog ---
Would you like to enter the initial configuration dialog? [yes/no]:
-
1
- #4
jevansau99
MIS
click "no" and then type "sh ver" when it boots up and tell me what it says near the bottom for "Config Register" ... right now it is ignoring the "startup config" file and thats why your getting this. you need to make your settings .. ie. setting the enable password, etc. then type "config register 0x2102" and reload. this should fix it.
- Status
Similar threads
- Locked
- Question
