Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Interlia

Status
Not open for further replies.
dmpd

dmpd

Vendor
Joined
May 14, 2004
Messages
47
Location
US
How many trunk ports can you bridge from an NT8D14 on an 81c to one Interalia port?
Thanks
 
Sort by date Sort by votes
Are you using broadcast ports or standard 1:1 ports?
 
Upvote 0 Downvote
Standard RAN ports.
 
Upvote 0 Downvote
You should be able to get up to 16 ports from a single Interalia port. I've seen some companies put up to 32 on a single port, but I didn't test them out all the way to make sure the signal didn't degrade due to the impedance.
 
Upvote 0 Downvote
From the Interalia manual referencing Nortel:
NOTE: The 'Low Impedance' option is required when 4 or more RAN trunks connected in parallel to a single line.
That said, I have connected up to 8 ports with no complaints, although I don't know if all 8 RAN trunks were in use at the same time.
 
Upvote 0 Downvote
How do you wire 8 trunk ports to the interalia and are you using the the Tip Ring pairs or the Start 1 and CP 1 C, NC or NO pairs
 
Upvote 0 Downvote
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top