Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
intercom
- Thread starter tech257
- Start date
RikRodgers
Vendor
I don't have much experience with panasonic, but I would assume the door phone is analog. You'll need an ata to convert the digital port from the system.
Nortel makes a pretty decent digital door phone, though I don't recall wheather it's compatible with a 6x16. If they're using it to unlock / buzz in customers at the front door, this may be a better option.
Nortel makes a pretty decent digital door phone, though I don't recall wheather it's compatible with a 6x16. If they're using it to unlock / buzz in customers at the front door, this may be a better option.
What make/model of door phone is it?
The ones that we always put in are made by Valcom. These are terminated on a trunk port as an incoming trunk. Then you assign the trunk to appear and ring on certain phones and label the button as "Door". When someone presses a button, the unit generates ring tone and waits for someone to access the line. When it senses that the call is answered, it provides talk battery to allow 2-way conversation.
The ones that we always put in are made by Valcom. These are terminated on a trunk port as an incoming trunk. Then you assign the trunk to appear and ring on certain phones and label the button as "Door". When someone presses a button, the unit generates ring tone and waits for someone to access the line. When it senses that the call is answered, it provides talk battery to allow 2-way conversation.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question