Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Installing a New S8300 LSP w/350
- Thread starter chuck14
- Start date
use "ssh", and type in the following command to your S8300:
ssh root@127.1.1.11
when it asks for the password, try 'root'
if you get in, you can then do this:
"user root password rootroot access admin"
"user dadmin password xyzzy access admin"
I would also issu an "ip telnet" to allow telnet to the media gateway, SSH is a pain
then do a 'copy running-config startup-config" to make the changes semi permanent.
Sometimes the wizard just doesn't work right. the 127.1.1.11 IP in the internal IP between the S8300 and the media gateway. should work..
mitch
AVAYA Certified Specialist
ssh root@127.1.1.11
when it asks for the password, try 'root'
if you get in, you can then do this:
"user root password rootroot access admin"
"user dadmin password xyzzy access admin"
I would also issu an "ip telnet" to allow telnet to the media gateway, SSH is a pain
then do a 'copy running-config startup-config" to make the changes semi permanent.
Sometimes the wizard just doesn't work right. the 127.1.1.11 IP in the internal IP between the S8300 and the media gateway. should work..
mitch
AVAYA Certified Specialist
- Status