Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Install Patch in 24 ITG card
- Thread starter ouchouch
- Start date
Copy the patches to the Root directory of the ITG
Copy "/A:/IPLxxxxfilename.sa","/C:/EXEC".
To verify success:
cd "u/patch"
ll and user should be able to see the patch that was installed.
pload " patch name" ............. this will load the patch
pins " patch name" ..............this command turns on the patch
pstat display summary of installed patches.
On Switch Patch Tool CLI Commands
The patcher commands are executed either from CLI or under vxWorksShell level.
1. pload Loads a patch file from C: drive into memory.
2. pout Removes a patch from memory.
3. pins Activate a ploaded patch, and puts it in-service.
4. poos Deactivate an in-service patch, and takes it out-of-service.
5. pstat Displays summary status of all loaded patches.
6. plis Gives detailed information about one patch in the system.
Copy "/A:/IPLxxxxfilename.sa","/C:/EXEC".
To verify success:
cd "u/patch"
ll and user should be able to see the patch that was installed.
pload " patch name" ............. this will load the patch
pins " patch name" ..............this command turns on the patch
pstat display summary of installed patches.
On Switch Patch Tool CLI Commands
The patcher commands are executed either from CLI or under vxWorksShell level.
1. pload Loads a patch file from C: drive into memory.
2. pout Removes a patch from memory.
3. pins Activate a ploaded patch, and puts it in-service.
4. poos Deactivate an in-service patch, and takes it out-of-service.
5. pstat Displays summary status of all loaded patches.
6. plis Gives detailed information about one patch in the system.
- Status
