Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Inside PCs could not browse Webserver in DMZ 1

Status
Not open for further replies.

wstran

MIS
Jul 18, 2002
46
US
Greetings,

Our problem is that all PCs in the PIX's inside area (192.168.1.xxx) could not access to the web pages of the web server (192.168.2.3) located in dmz area. BTW, the web server was NAT'ed to the outside and can be seen by any one from outside. Please advise, thanks!
 
You could do :

access-list nonat permit ip 192.168.1.0 255.255.255.0 host 192.168.2.3

nat (inside) 0 access-list nonat

This will tell the pix what to do with the traffic from inside to the server in the dmz, in this case it is not nat'ed.


Network Systems Engineer
CCNA/CQS/CCSP/Infosec
 
Thanks very much, Dopehead. It worked right after I entered your suggested solution.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top