Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
increase capacity of number of measured Skill/split in CMS ?
- Thread starter nortavaya
- Start date
AvayaTier3
Technical User
Depending on your PBX / CMS versions, you may only need to increase allocation for agent and trunks for the CMS disk space.
A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"
bsh
44 years Bell, AT&T, Lucent, Avaya
Tier 3 for 34 years and counting
[URL unfurl="true"]http://bshtele.com[/url]
A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"
bsh
44 years Bell, AT&T, Lucent, Avaya
Tier 3 for 34 years and counting
[URL unfurl="true"]http://bshtele.com[/url]
- Thread starter
- #3
- Thread starter
- #5
Thank you, I found this procedure in Avaya support:
Prerequisite: Check free space:
Check the amount of free space in the Free Space Allocation window, and determine where you can allocate space for data storage.
Turn data collection off:
Go to menu ‘System setup’.
Go to menu 'Data collection'.
End, turn off data collection for all ACD measured.
Set single-user mode:
Go to menu ‘System setup’.
Go to menu 'CMS State'.
End, set the system in single user mode.
Modify the data storage allocation:
Go to menu ‘System setup’.
Go to menu 'Data Storage Allocation'.
Complete the Data Storage Allocation window to change the allocated amount of storage space used when collecting historical data.
When finished making changes, select Modify from the Actions menu to accept the change.
Verify the free space allocation after making change:
Check the amount of free space in the Free Space Allocation window.
If you allocate more space through Data Storage Allocation than is available, the Free Space Allocation window will display the number of blocks that the disk is deficient by in parentheses.
In this case, adjust the free space allocation
is it correct ?
Thank you
Prerequisite: Check free space:
Check the amount of free space in the Free Space Allocation window, and determine where you can allocate space for data storage.
Turn data collection off:
Go to menu ‘System setup’.
Go to menu 'Data collection'.
End, turn off data collection for all ACD measured.
Set single-user mode:
Go to menu ‘System setup’.
Go to menu 'CMS State'.
End, set the system in single user mode.
Modify the data storage allocation:
Go to menu ‘System setup’.
Go to menu 'Data Storage Allocation'.
Complete the Data Storage Allocation window to change the allocated amount of storage space used when collecting historical data.
When finished making changes, select Modify from the Actions menu to accept the change.
Verify the free space allocation after making change:
Check the amount of free space in the Free Space Allocation window.
If you allocate more space through Data Storage Allocation than is available, the Free Space Allocation window will display the number of blocks that the disk is deficient by in parentheses.
In this case, adjust the free space allocation
is it correct ?
Thank you
- Thread starter
- #6
- Status
Similar threads
- Locked
- Question
- Locked
- Question