Hey guys,
I have a Nortel M81c that is not outpulsing the correct DTMF tones from digital sets. Dialing internally to other sets is fine, but interacting with any system that uses DTMF as an input is impossible. For example: Users can reach the voicemail system, but are unable to navigate it. Analog sets work just fine (internally and externally).
I have called a nearby set and listened to these tones and they are way off!
The tech who installed the system has TTBL 1 selected in the CDB. I tried the default TTBL 0, but that throws EVERY tone off kilter. Dialtone sounds like DTMF, ringback sounds like DTMF...
Conf/TDS DTMF is set to 14 in LD 97.
What could it be??
I have a Nortel M81c that is not outpulsing the correct DTMF tones from digital sets. Dialing internally to other sets is fine, but interacting with any system that uses DTMF as an input is impossible. For example: Users can reach the voicemail system, but are unable to navigate it. Analog sets work just fine (internally and externally).
I have called a nearby set and listened to these tones and they are way off!
The tech who installed the system has TTBL 1 selected in the CDB. I tried the default TTBL 0, but that throws EVERY tone off kilter. Dialtone sounds like DTMF, ringback sounds like DTMF...
Conf/TDS DTMF is set to 14 in LD 97.
What could it be??