Incomming Caller ID on Analog trunks

[mhypolite]

Hi all, I have TN747B Analog CO Trunk cards on a Definity system, I am trying to enable analog incoming caller ID, but I get a message saying it Requires DMM4 or TN429D or later circuit packs, does the TN747B not support caller id or am I missing a configuration elsewhere?

Thanks in advance all.

 

[nohuhu]

mhypolite,

message is right, tn747 does not support incoming caller id.

 

[mhypolite]

Damm, Is there anything i can do to get the callers number to be displayed on the sets besides getting different circuit packs, or am I screwed?

 

[busster]

Nothing you can do.