Incoming calls Dialplan from Asterisk to CS1000 1

[canopus]

How can I build an appropiate dialplan from Asterisk via PRI ESS5 D4 AMI to CS1000?

I´m receiving calls from TELCO inmediatly to IVR in asterisk so when callers dial a digit to desired extension, I need the Dialplan here.

Mostly for NXXX (4) digits.

Any help?

 

[janaya]

you just need to pass the extension over the PRI to the Nortel. It will pass the call when you send it. If you are passing more digits than the Nortel is expecting, just create an IDC table and remove the unwanted digits.

John Anaya
Signet6 Network Sciences
ACSS/ACIS - CS1000 Rls 7.5/Call Pilot 5
ACSS/ACIS - SME - IP Office 8.0
APSS/APDS - Avaya UC Services

Public Profile

http://www.linkedin.com/pub/john-anaya/25/1b9/a9b/Edit

 

[canopus]

Thank you!

This is unbelievable how fast you answer here!

Thanks a lot!

 

[janaya]

its slow this morning. sometimes its not as quick.

John Anaya
Signet6 Network Sciences
ACSS/ACIS - CS1000 Rls 7.5/Call Pilot 5
ACSS/ACIS - SME - IP Office 8.0
APSS/APDS - Avaya UC Services

Public Profile

http://www.linkedin.com/pub/john-anaya/25/1b9/a9b/Edit