inbound calls route to alternate system

[Pir8Radio]

Hello is there a way in the cs1000 to route calls that do not match any dns on the sytem out another PRI? for example any inbound calls that would normally get a fast busy, i need to reroute to another phone system connected via a few pri's. i would possibly need this to happen for 4 digit internal calls as well.. say i dial 4000 and that dn isnt on the nortel system, instead of a fast busy i would need it to send the call to the other pbx via the pri's and let it fail there if that dn isnt on that system either.

 

[M1spezi]

Yes there is a way to route calls for not existing numbers. In Net-Data is a prompt VNR. ( vacant number routing)

REQ: prt
TYPE: net
TYPE NET_DATA
CUST 0

TYPE NET_DATA
CUST 00
OPT RTD
AC1 INTL NPA SPN NXX LOC
AC2
FNP YES
ISDN YES
VPNI 1
PNI 1
PINX_DN 765432
MBG 0
BSGC 65535
PFX1
PFX2
HLOC 92
LSC
RCNT 5
PSTN NO
TNDM 15
PCMC 15
SATD 1
OCLI EXT
MSCO_DP PRV
TIDM NO
DASC
ROPT RAX
DITI YES
TRNX YES
EXTT YES
FTOP FRES
APAD 0 1
VNR YES
RLI 120
CDPL 7
UDPL 10
NIT 8
NAS_ATCL YES
NAS_ACTV NO
FOPT 0
CNDN
CNAT
CNIP YES
DMWM NO
MWNS NO
CNTC
NATC
INTC
ELC NO

In this example all calls to not existing numbers are routed to RLI 120.


Meridian, Callpilot, CCM (Symposium) from Germany

 

[Pir8Radio]

Oh no crap.... Thanks! Ill do some digging see what mine is set to now, what is cdpl and udpl?

 

[M1spezi]

CDPL is CDP length
UDPL is UDP length
It´s for virtuell trunking (H323 or SIP).




Meridian, Callpilot, CCM (Symposium) from Germany