Implementing AS2509-RJ Access Server

[Bedrock1977]

I am finally implementing a Cisco 2509-RJ Access Server. It get's very tiring swapping console cables back and forth when trouble shooting connections between multiple routers! Anyway,I want to be able to access the rack remotely and my original thought would be to connect the e0 interface directly to the Linksys Wireless router with a dedicated IP address in the 192.168.1.0 network. The rest of the computers in the house are on the same network.

Does anyone see any other potential issues by doing it this way? To access the main PC at home, I have a dynamic dns domain attached to the computers IP address. Should I do something like this for the cisco rack?

Thanks,
Bedrock1977

 

[Lonewulf]

Bedrock, have you received an answer to your question yet?

 

[Bedrock1977]

I did not receive one here obviously, but I was able to work through it on my own. Thanks.