Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IGAR (Inter-Gateway Alternate Routing.)

Status
Not open for further replies.

Multidisadvantaged

Technical User
Nov 7, 2002
22
GB
I wonder if any of you have set this up before. I fully undrstand the principles of this but I cannot find any documentation that shows you how to set this up.
So far I gather that it interacts with the CAC feature and that it is all set up from the IP-Network-Region form but I need more detail.

Any help, advice or documents appreciated.

Thanks

 
Thanks, I had seen that doc but was after a little more detail on implementation. Managed to find some more detail in the Administrator Guide for ACM.
Gonna have to wing this one a bit!!

Thanks again.

 
Hi,

We setup IGAR succesfully but have one issue:

When my call is routed true IGAR it is always the central site who does the call setup. Even when the remote site makes the call.
Is this a normal behavior ?

Regards,
Luc
 
no it should not. Check the correct LDN number on IP-Network-Region page 2 for each site.

Make sure each site has its own network region.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top