I get an : "There is a problem with a registration database"

[SRFRIO]

error when opening an Access 2.0 graph. The problem seems to be that some machines has a newer version of MSGraph ( such like 7.0 or 9.0). How can I register the graph again in the previous version? Another important thing is that I've got in my PC Access 2 ,7 and 2000 installed; could this be the problem???
TIA
SRFRIO,

 

[DougP]

Multiple versions I'm sure it might be.
the way to fix any of them would be to re-install it.
I kniow you can have '97 and 2000 on the same machine not sure about 2.0 with them as well.
But with the '97 to 2000 ratio '97 must be installed first and then re-boot and install 2000 leaving the '97 programs when asked.

Also if you are using Outlook 2000 and have Word 2000 as your e-mail editor and then you open Word '97 for some reason. Outlook 2000 will stop using Word 2000 as the e-mail editor (you will get an error saying it can’t Open Word 2000 blah blah blah). But it can be fixed by re-launching Word 2000 and then re-opening Outlook 2000 and clicking on then “use Word as e-mail editor” again. DougP, MCP

Visit my WEB site

http://www.barcodeone.com

to see how Bar-codes can help you be more productive