Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

I can't enable "Standby"

Status
Not open for further replies.

cadenton

Technical User
Dec 19, 2002
52
US
I have a new Dell 4600. I set the power scheme to go to "System Standby after 1 hour."

I did it once yesterday -- and I brought it out of standby, by pressing the power ON button. But now it won't go into Standby after an hour, as it should.

I re-set it a few times; I tried different lenghts of time, etc.

I can't seem to "persuade" it to go into standby.

Any suggestions?
 
Was the machine actually idle, for example was there a screensaver or background process running, this might reset the time factor of entering Standby?

310601 - Computer Does Not Enter Standby Mode If Power Options Profile Is Set to Standby After 45 or More Minutes


Have a look around Google.




 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top