I can´t access several servers behind a nt-5gt ADSL form the Internet.

[juanan07]

Hi,

I have tried for two months configure nat-dst with port mapping on juniper netscreen 5GT Adsl. From untrust to trust interface, but is not possible for me. I need to access 3 lan servers behind netscreen from de internet, and I have tried everything.

1)I have tried VIP and policies (this solutions works correctrly, but the sessions on netscreen grown to the limit and the device drop-down).

2)I have tried MIP and Policies but only a server can be accessible from the internet

3)I have tried One-to-many nat destination as manual says. But Manual using DMZ and routing and its no possible for me with only trust and untrust interface.

Could be someone help me?

How can I configure my netscreen to access to the lan servers from the internet?

 

[Packet7]

Hi,

We currently use a MIP and policy for each internal server. For the sites that only have a few IP's, we use a VIP with a policy. What code are you running?

Rgds,

John

 

[sikek]

Can you please post your config .