hunting on an option 11c 1

[genesmitty]

ok, i've got a bit of trouble thats just driving me batty.

i've got a 500 line ext 77, that i need to roll over to ext 5735 after a few rings, (number not so important)

i can't seem to make it do it.

do i have to do something special to make a 500 roll to a 2616?

 

[acewarlock]

FDN 5735
CLS FNA

Post the TNB of the 500 set.

 

[genesmitty]

REQ: prt
TYPE: tnb
TN 20 0 11 15
DATE
PAGE
DES

DES
TN 020 0 11 15
TYPE 500
CDEN 4D
CUST 0
WRLS NO
DN 77 0
CPND
NAME SWAN TERRACE
XPLN 17
DISPLAY_FMT FIRST,LAST
AST NO
IAPG 0
HUNT 5735
TGAR 0
LDN NO
NCOS 5
SGRP 0
RNPG 0
XLST
SCI 0
FNA HTA ONS FBA XFD WTA THFD
LPR XRD AGRD CWD SWD MWD RMMD SMWD LPD XHD SLKD CCSD LND TVD
CFTD SFD MRD C6D CNID CLBD AUTU
ICDD CDMD LLCN EHTD MCTD
GPUD DPUD CFXD ARHD OVDD AGTD CLTD LDTD ASCD
MBXD CPFA CPTA DDGA NAMA MIND
MCRD
EXR0 SHL ABDD CFHD DNDY DNO3
CWND USMD USRD BNRD OCBD RTDD RBDD RBHD FAXD CNUD CNAD PGND FTTU
CDMR
RCO 0
PLEV 02
CSDN
AACS NO
MLWU_LANG 0
DATE 12 JUL 2007





Also as an FYI, this dn is an extension on 6 digital sets, some 2008, some 2616's. not sure if it matters.

also, under load 82

REQ hnt
CUST 0
DATE
PAGE
DES
DN 77


00 77 TO 5735 020 0 08 12 2008 **SWAN 9 AUG 2006
---- 77 020 0 11 15 2500 ** MODEM 12 JUL 2007
FROM 2760 020 0 07 00 2616 01 542 30 MAY 2006
FROM 5760 020 0 07 00 2616 **542 30 MAY 2006



So it looks like it's set to hunt ok. everything looks right, except that it's just not rolling.
it rolls somewhere, but it doesn't ring on 5735

 

[acewarlock]

FBA is for DID BUSY to ATT, CHG to FBD

FTR FDN 5735



When you do a
PRT
DNB
5735
which TN has the MARP on it?

 

[genesmitty]

DN 5735
CPND
NAME SWAN KITCHEN
XPLN 27
DISPLAY_FMT FIRST,LAST
TYPE SL1
TN 020 0 08 12 KEY 00 H MARP DES SWAN 9 AUG 2006
(2008)
TN 020 0 05 08 KEY 04 DES 303 5 JUL 2007
(2616)


This is the DNB of 5735. the tnb for the analog line that 77 is on is 20 0 11 15

 

[acewarlock]

Sorry I mean't DNB for 77

 

[genesmitty]

DN 77
CPND
NAME SWAN TERRACE
XPLN 17
DISPLAY_FMT FIRST,LAST
TYPE MIX
TN 020 0 11 15 DES MODEM 13 JUL 2007
TN 004 0 11 15 DES SWANCT 12 JUL 2007
TN 020 0 00 09 KEY 02 DES REST 12 JUL 2007
(2008)
TN 020 0 05 08 KEY 09 DES 303 5 JUL 2007
(2616)
TN 020 0 08 12 KEY 04 DES SWAN 9 AUG 2006
(2008)
TN 020 0 08 00 KEY 01 H MARP DES 529 9 JUN 2006
(2616)
TN 020 0 06 02 KEY 03 DES 516 6 FEB 2004
(2616)
TN 004 0 08 15 KEY 01 H DES SWAN 12 JUL 2007
(2008)

 

[acewarlock]

77 is MARPED on TN 20 00 08 00, so that phone is the controlling phone. change the MARP to the 500 set.

 

[genesmitty]

ok.... i'm getting an error
>err sch8825
>

SCH8825
The DN must first be removed from the GHT list.



In trying to get this all setup i created a ght list under ld 27, i'm not sure how to uncreate it.

 

[genesmitty]

Nvmnd. i figured it out.

Ld 18
out
ght