Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

HP NetRaid 2M + Adaptec?

Status
Not open for further replies.
Guest_imported

Guest_imported

New member
Jan 1, 1970
0
'lo

Is there any possibility to take an external raid array from an Adaptec card and attach it to a HP NetRaid card and restore the raid information from disks to the card, without destroying any data? I'm using both Raid1, Raid5 and Raid10 on diffrent arrays, and I want to be able to move them all to the NetRaid card from the Adaptec one. I really need to be sure this works before doing it, and unfortunatly I don't have any system to laborate with.

Thanks,

Johbe
 
Status
Not open for further replies.

Similar threads

MoMurdoc
  • Locked
  • Question
Moving an HP D6000 to another server
Replies
0
Views
237
MoMurdoc
MoMurdoc
KubaKuba
  • Locked
  • Question
HP LeftHand P4300
Replies
0
Views
203
KubaKuba
KubaKuba
johnsmike
  • Locked
  • Question
HP ProLiant server hangs at “Power and Thermal Calibration” screen
Replies
3
Views
795
johnsmike
johnsmike
Jacktivated
  • Locked
  • Question
HP StorageWorks P4300 SAN (Need software recommendations)
Replies
0
Views
179
Jacktivated
Jacktivated
Chris969404
  • Locked
  • Question
Quantum i6K with HP LTO5 attached to AIX/TSM
Replies
0
Views
169
Chris969404
Chris969404

Part and Inventory Search

Sponsor

Back
Top