HP Jetdirect to SCO 3.2 server

[elazur]

Has anyone ever successfully installed a HP jetdirect EX and used external printing with SCO 3.2 server?

 

[mtxmax]

I have succesfully configured single and multiport Jetdirects under OpenServer. Refer to the tech articles at <A HREF="

http://www.sco.com/"

TARGET="_new">

http://www.sco.com/</A>.

For single port, just use HPNP. For multiport, use rlpsetup and then edit the interface file(s) to explicitly nominate the port number. One trap to be wary of, is you have to setup the printers on port1 then port2 etc. You CANNOT have port2 and port3 setup with port1 empty.<br>
<br>
Regards, Mtxmax.