Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

HP 2100 no drive signal for cassette or man. feed

Status
Not open for further replies.
Autonut

Autonut

Vendor
Joined
May 1, 2006
Messages
4
Location
CA
Mechanical OK. I am able to manually activate manual feed solinoid drive then works. I'm looking for a schematic for the main controller PCB can anyone help? As an alternative if anyone has had this issue and can offer their experience I would be gratefully received.
 
Status
Not open for further replies.

Similar threads

T
  • Locked
  • Question Question
Paper jam on HP 4050N
Replies
1
Views
673
DrB0b
DrB0b
tom_noods
  • Locked
  • Question Question
HP PageWide 577 - Large missing sections on prints
Replies
2
Views
1K
tom_noods
tom_noods
Cressplant
  • Locked
  • Question Question
Replacement Internal Cables for HP Officejet 7612
Replies
2
Views
867
Cressplant
Cressplant
joshfreeman
  • Locked
  • Question Question
Is it true that notarization can now be done totally with the help of operating systems and live sca
Replies
1
Views
645
johneggers446gmail.com
johneggers446gmail.com
PhoneFreak89
  • Locked
  • Question Question
HP CLJ CP3525DN "Close Front or Right Doors" Error
Replies
1
Views
409
DrB0b
DrB0b

Part and Inventory Search

Sponsor

Back
Top