Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
How to upgrade to WinSPM from Legend 6.1
- Thread starter MeNoSabe
- Start date
MeNoSabe,
You need the following
1. A computer running windows
2. The Win SPM software
3. A 355A or 355 AF adapter (and the necessary gender changers to hook it to your serial port)
4. A patch cord to go from the admin port to the 355 adapter
You can also connect using a modem hooked up to an analog port but the Direct connect is the way to go.
If the computer is 50 feet or farther than the system then you will need ADUs.
Don
You need the following
1. A computer running windows
2. The Win SPM software
3. A 355A or 355 AF adapter (and the necessary gender changers to hook it to your serial port)
4. A patch cord to go from the admin port to the 355 adapter
You can also connect using a modem hooked up to an analog port but the Direct connect is the way to go.
If the computer is 50 feet or farther than the system then you will need ADUs.
Don
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question