how to stop the scrolling of an error message

[black241988]

there is a error message of AUD0000093 on the switch that keeps scrolling and i was wondering what i might need to do to get that to stop its kind of annoying when i'm trying to program a phone or program something in the switch and then i get lost because of the scrolling of that error

 

[bdmcdonald99]

AUD0093 PTN associated with an IDLE VTN Removed.
Figure out what the VTN is and remove it. Then EDD and INI pbx if neccesary.

 

[black241988]

i've already tried to INI it and it still comes back

 

[bhassell2000]

post the error message with the hex cose and someone on here can tell you want VTN it is and you can remove it

Thanks,

Buddy

Linked in Profile

http://www.linkedin.com/in/buddyhassell

 

[black241988]

what is a hex cose

 

[bhassell2000]

sorry its hex code

Thanks,

Buddy

Linked in Profile

http://www.linkedin.com/in/buddyhassell

 

[black241988]

so do you just want me to copy and paste that error code into here then

 

[johnpoole]

remove the vtn... duh

john poole
bellsouth business
columbia,sc

 

[black241988]

how do you remove the vtn

 

[bhassell2000]

yes, paste the hex code with the error and we can tell you thre tn then go to ld 20 and out it

Thanks,

Buddy

Linked in Profile

http://www.linkedin.com/in/buddyhassell

 

[black241988]

ok sounds good i will get that code and paste it when i can get over to that pbx which will probably be tomorrow

 

[black241988]

here is the scrolling error message i get

AUD093 000007ED 00000652 0EF00663 00000001 00000000

 

[pronei]

07ED = 35 0 0 29
0652 = 28 0 0 6

Do either of those TN's exist in your PBX, before you delete, post them here. 35 0 0 29 seems to only be possible on an E1 circuit and that TN would actually be 35 29, no shelf or card designator.

http://www.linkedin.com/in/neil74/

 

[black241988]

TN 28 0 0 6 exists in our PBX ... how are you able to look up what TN goes with that Hex code

 

[janaya]

AUD093 000007ED 00000652 0EF00663 00000001 00000000

07ED = 35 0 0 29
0652 = 28 0 0 6

You can see the 07ED AND THE 0652 in the first two blocks.

LD 32

.conv 07ED

This will print out the TN conversion.

 

[black241988]

oh ok so how do i stop the scrolling of that error and hex code

 

[bhassell2000]

What is built on those 2 TNs? Might need to remove them or see what is going on

Thanks,

Buddy

Linked in Profile

http://www.linkedin.com/in/buddyhassell

 

[black241988]

well there is nothing on the 35 TN but on the 28 TN it is a digital phone