I have this question quite a few times lately therefore this "How to startup the neXer - ipLDK-24" is written.
1.
Normally the IP address of the standard neXer - ipLDK-24 is fixed and set to 192.168.1.1 with subnet mask 255.255.255.0
2.
Standard user ID and code is: admin / admin.
3.
Set your laptop to use the following IP address 192.168.1.1 with subnet mask 255.255.255.0.
4.
Use the LAN port closest to the cover. USB connector is not in use.
If the above does work let me know. Use the link in the signature for further details.
///doktor
1.
Normally the IP address of the standard neXer - ipLDK-24 is fixed and set to 192.168.1.1 with subnet mask 255.255.255.0
2.
Standard user ID and code is: admin / admin.
3.
Set your laptop to use the following IP address 192.168.1.1 with subnet mask 255.255.255.0.
4.
Use the LAN port closest to the cover. USB connector is not in use.
If the above does work let me know. Use the link in the signature for further details.
///doktor