Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Wanet Telecoms Ltd on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to set up cisco 3640 VoIP

Status
Not open for further replies.

suanny

MIS
Jan 28, 2003
10
CA
what we want to achieve utltimately is try to make a call with NeetMeeting
and establish a call with our main office phone number.

That implies that NeetMeeting must contact the GateKeeper in order to know the
route to establish the call. Then the GateKeeper informs that, from its table, that
the route is to the Cisco and then the Cisco accept the request and dials an
available E1 line from the E1 channel bank and that goes trough the PSTN and
come back to our office to make our office phone rings...

Now everytyhing seems to be working until it reaches the Cisco....What comes
before is functionning, the route, the gatekeeper, etc. The Cisco actually sees
the request but drop the line each time, we get a "NormalDrop" and it finishes
there. The Cisco seems to register itself with the Gatekeeper.

Thank you
Suanny
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top