Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
How to set station as a DID number?
- Thread starter Scottncs
- Start date
Make sure that the extension of the phone is in the DID range that you have with your provider.
If you don't know the DID range, contact your telco.
They should know....
It is just 'add station xxxx' where xxx is in the DID range.
Complete all fields required, hit ENTER and job is done.
If you don't know the DID range, contact your telco.
They should know....
It is just 'add station xxxx' where xxx is in the DID range.
Complete all fields required, hit ENTER and job is done.
can you be a little more specific?
What is your line type ISDN PRI?
If your provider sends it your way allright,
One way to do it is to set the filter right on trunk form like;
Service/ Called Called Del Insert Per Call Night
Feature Len Number CPN/BN Serv
public-ntwrk 9 123456 5 none
Takes the incoming number strips the first 5 digits and leaves the other 4 digits to pass as the extension.
so if the full number is 1234567890, 7890 is the extension adressed..
If the extension is not set up, the call defaults to the attendant.
This depends on the country setup though..
Rob
What is your line type ISDN PRI?
If your provider sends it your way allright,
One way to do it is to set the filter right on trunk form like;
Service/ Called Called Del Insert Per Call Night
Feature Len Number CPN/BN Serv
public-ntwrk 9 123456 5 none
Takes the incoming number strips the first 5 digits and leaves the other 4 digits to pass as the extension.
so if the full number is 1234567890, 7890 is the extension adressed..
If the extension is not set up, the call defaults to the attendant.
This depends on the country setup though..
Rob
- Status
Similar threads
- Question