Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
How to program account codes for outbound calling
- Thread starter vsunh
- Start date
Look at the text fragment from DEFINITY Enterprise Communication Server Release 9 Administrator’s Guide 555-233-506 Issue 2 November 2000:
" Before you can administer Forced Entry of Account Codes, it must be enabled on the System Parameters Customer-Options screens.
Instructions
In this example, we administer the system to force users in our North American
office to enter an account code before making international calls.
1. Type change system-parameters cdr and press RETURN.
The CDR System Parameters screen appears.
2. In the Force Entry of Acct Code for Calls Marked on Toll Analysis Form
field, type y.
3. In the CDR Account Code Length field, type 5.
4. Press ENTER to save your changes.
5. Type change toll 0 and press RETURN.
6. The Tol l Analysis screen appears.
change toll analysis Page 1 of 1
Dialed String Min Max RCL List FEAC 1 2 3 4 5 6 7 8 9 10
0__________ 1__ 1__ _ x _ _ _ _ _ _ _ _ _ _ _
01_________ 9__ 17_ _ x______ x _ _ _ _ _ _ _ _ _ _
011________10_ 18_ _ x ______x _ _ _ _ _ _ _ _ _ _
_____________________ ___ ___ _ _ _ _ _ _ _ _ _ _ _ _ _
7. In the first available Dialed String field, type 011.
This is the international access code for this office.
8. In the Total Min and Max columns, type 10 and 18, respectively.
This is the minimum and maximum number of digits the system will
analyze when determining how to handle the call.
9. In the Toll List and CDR FEAC columns, type x.
10. Press ENTER to save your changes.
More information
You can also establish a class of restriction with Forced Entry of Account Codes
set to y, and assign this COR to trunks or other facilities that you want to restrict.
With this method, all users with this COR must enter account codes before
making any outgoing trunk calls. See ‘‘Class of Restriction’’ for
more information."
" Before you can administer Forced Entry of Account Codes, it must be enabled on the System Parameters Customer-Options screens.
Instructions
In this example, we administer the system to force users in our North American
office to enter an account code before making international calls.
1. Type change system-parameters cdr and press RETURN.
The CDR System Parameters screen appears.
2. In the Force Entry of Acct Code for Calls Marked on Toll Analysis Form
field, type y.
3. In the CDR Account Code Length field, type 5.
4. Press ENTER to save your changes.
5. Type change toll 0 and press RETURN.
6. The Tol l Analysis screen appears.
change toll analysis Page 1 of 1
Dialed String Min Max RCL List FEAC 1 2 3 4 5 6 7 8 9 10
0__________ 1__ 1__ _ x _ _ _ _ _ _ _ _ _ _ _
01_________ 9__ 17_ _ x______ x _ _ _ _ _ _ _ _ _ _
011________10_ 18_ _ x ______x _ _ _ _ _ _ _ _ _ _
_____________________ ___ ___ _ _ _ _ _ _ _ _ _ _ _ _ _
7. In the first available Dialed String field, type 011.
This is the international access code for this office.
8. In the Total Min and Max columns, type 10 and 18, respectively.
This is the minimum and maximum number of digits the system will
analyze when determining how to handle the call.
9. In the Toll List and CDR FEAC columns, type x.
10. Press ENTER to save your changes.
More information
You can also establish a class of restriction with Forced Entry of Account Codes
set to y, and assign this COR to trunks or other facilities that you want to restrict.
With this method, all users with this COR must enter account codes before
making any outgoing trunk calls. See ‘‘Class of Restriction’’ for
more information."
- Status
Similar threads
- Locked
- Question