balanceproper
IS-IT--Management
how do i configure the scanner in back of house
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
how to for finger print scanner
- Thread starter balanceproper
- Start date
- Status
In Aloha Manager, go to Hardware -> Terminals. Select the terminal the fingerprint reader is connected to, and switch to the Readers tab. Select the check box next to Use Fingerprint Scanner and select either Radiant or Veridicom fingerprint reader from the drop down box.
See the screenshot attached.
Visit my website at www.wischmanns.com!
See the screenshot attached.
Visit my website at www.wischmanns.com!
- Status
Similar threads
- Locked
- Question
- Locked
- Question