How to do a hotdial on M1

[Ronus]

I cannot remember for the life of me how to set up a hotdial on the M1. Basically it's just a direct line to call for a shuttle. Can anyone point me in the direction to set one up.

 

[phonz1]

set up a key:

key xx hot d xxxxxxxx

 

[Ronus]

Yeah, this particular one is for a 500 set. I tried to put that inot the FTR field and got an error saying the cls needs MNL, so changed that, but i'm tryin to hotdial to a 12 digit number. ie 12-xxx-xxx-xxxx.

So getting a msg now that there is too many input numbers.

 

[phonz1]

try hot d 12 xxxxxxxxxxxxxxx, also if it's going off prem, make sure that you can dial it and check CLS for CFXA

 

[Ronus]

Yup thanks for your help. I'm just getting back into M1 after about a 8yrs, and i have located no NTP's yet.

 

[phonz1]

alot has changed and alot is the same!! Like riding a bike!!

 

[johnpoole]

i don't add cfxa, just be sure the ncos can dial the dn then cls mnl, hot d 8 9xxxxxxx, and it will ring.. we use that a lot here

john poole
bellsouth business
columbia,sc

 

[GHTROUT]

Ya, CFXA is only if you are using call forward. Has nothing to do with HOT or placing calls. Here is a set of NTPs for you as well.




~~~
GHTROUT.com | Get the Input/Output Manuals | Tek-Tips FAQs | Recent Replies

 

[Ronus]

ok guys. i got it. Thanks for the help, and for the NTP's P

hot d 12 12xxxxxxxxxx


hehehe i forgot to enter the number of digit field the first time, but quickly remembered

Thanks again